Factory Supply Common Rail Injector Test - 14 Pc Diesel Injector Extractor Puller W/Slide Hammer Set Auto Tool – JOCEN

14 Pc Diesel Injector Extractor Puller W/Slide Hammer Set Auto Tool.

For removing stuck and the seized common-Rail Injectors without dismount the cylinder head.
For the removal of Bosch, Delphi, Denso, Siemens and Pumpe Duse diesel injectors.
4 Set includes keys and deep open profile sockets, Used to dismantle injectors, plus a selection of adaptors for attaching the slide hammer securely to the body of the injector.
4 Ball joint and choice of two sizes of slide hammer allow access in confined areas if required.
4 Contents: Slide Hammers; 1.3kg with 150mm Shaft, 4kg with 400mm Shaft, 4kg Slide Hammer Handle, Flexible Joint.
Security Hex Key 10mm, Adaptors Male; 10×1.5, 16×1.5, 17×1.0, 20×1.0, 25×1.0, 27×1.0mm, Adaptors Female; 14×1.5, 27×1.0mm(3pc), Adaptors Hexagonal; 17mm(10×1.5 Female) 21mm(14×1.5 Female), Adaptors ‘C’andJ’(Pump Duse), Claw Adaptor, Injector Cap Sockets1/2″Sq Drive; 25, 27, 29, 30mm.
For all injection nozzle cars.
Adaptor: M14 x 1.5 for DELPHI.
Adaptor: M17 x 1 for Bosch.
Adaptor: M20 x 1 for DENSO.
Adaptor: M24 x 1 for SIEMENS.
Adaptor: M27 x 1 for SIEMENS.
Adaptor: M27 x 1.0 for Bosch injector nozzle.
Adaptor: Puller W/M14x 1.5P.
4 pcs Injection nozzle socket 100L-25-27-29-30mm 6PT.

Include

● 1 * T-bar with 3/8inch Drive.
● 7 * Hex Key Socket.
● 4 * Square Key Socket.
● 1 * Storage Case.
● T-bar Size: 3/8inch Drive, 165mm/6.5inch.
● Hex Key Drives Sizes: 3/8inch, 8mm, 9mm, 10mm, 12mm, 14mm, 17mm.
● Square Key Drives Sizes: 3/8inch, 8mm, 11mm, 13mm.